Blar i Artikler, kapitler og presentasjoner fra NORCE Energi og teknologi på tittel
Viser treff 21-40 av 206
-
Automatic length estimation of free-swimming fish using an underwater 3D range-gated camera
(Peer reviewed; Journal article, 2022)Camera estimation of fish size in aquaculture production and fisheries is crucial for enabling knowledge-based decision making. Automatic estimation of fish lengths on an individual and population basis are key steps to ... -
Automatic Measurement of the Dependence on Pressure and Temperature of the Mass Density of Drilling Fluids
(Peer reviewed; Journal article, 2022)Drilling fluids are subject to substantial variations in pressure and temperature while they are circulated in a well. These changes are so great that the mass density of the drilling fluid varies significantly during ... -
Autonomous Decision-Making While Drilling
(Journal article; Peer reviewed, 2021)The drilling process is complex because unexpected situations may occur at any time. Furthermore, the drilling system is extremely long and slender, therefore prone to vibrations and often being dominated by long transient ... -
Autonomous Surface and Underwater Vehicles as Effective Ecosystem Monitoring and Research Platforms in the Arctic—The Glider Project
(Journal article; Peer reviewed, 2021)Effective ocean management requires integrated and sustainable ocean observing systems enabling us to map and understand ecosystem properties and the effects of human activities. Autonomous subsurface and surface vehicles, ... -
Autonomous unmanned aerial vehicles in search and rescue missions using real-time cooperative model predictive control
(Peer reviewed; Journal article, 2019)Unmanned Aerial Vehicles (UAVs) have recently been used in a wide variety of applications due to their versatility, reduced cost, rapid deployment, among other advantages. Search and Rescue (SAR) is one of the most prominent ... -
Bayesian model evaluation for multiple scenarios
(Peer reviewed; Journal article, 2023)Traditional uncertainty analysis for subsurface models is typically based on a single dynamic model with a number of uncertain parameters. Improved and more robust forecasting can be obtained by combining several models ... -
Cement properties characterization from a section retrieved from an oil production well after 33 years of downhole exposure
(Peer reviewed; Journal article, 2021)A unique data set has been constructed based on the study of class G cement recovered from an oil well on the Norwegian continental shelf. The cement was placed between two casing sections and submitted to downhole conditions ... -
Challenges and possible solutions in cross-disciplinary and cross-sectorial research teams within the domain of e-mental health
(Peer reviewed; Journal article, 2021)Purpose Mental illness presents a huge individual, societal and economic challenges, currently accounting for 20% of the worldwide burden of disease. There is a gap between the need for and access to services. Digital ... -
CO2 Convection in Hydrocarbon Under Flowing Conditions
(Peer reviewed; Journal article, 2021)Carbon-neutral oil production is one way to improve the sustainability of petroleum resources. The emissions from produced hydrocarbons can be offset by injecting capture CO2 from a nearby point source into a saline aquifer ... -
CO2 Convective Dissolution in Oil-Saturated Unconsolidated Porous Media at Reservoir Conditions
(Peer reviewed; Journal article, 2021)During CO2 storage, CO2 plume mixes with the water and oil present at the reservoir, initiated by diffusion followed by a density gradient that leads to a convective flow. Studies are available where CO2 convective mixing ... -
CO2 Dissolution and Convection in Oil at Realistic Reservoir Conditions: A Visualization Study.
(Peer reviewed; Journal article, 2021)CO2 convective mixing has been extensively studied for CO2 dissolution in saline water but very limited with the presence of oil. The objective of this work was to visually study the supercritical CO2 (sCO2) dissolution ... -
A combined finite element–finite volume framework for phase-field fracture
(Peer reviewed; Journal article, 2021)Numerical simulations of brittle fracture using phase-field approaches often employ a discrete approximation framework that applies the same order of interpolation for the displacement and phase-field variables. In particular, ... -
Combined Thickness and Permittivity Measurement of Thin Layers with Open-Ended Coaxial Probes
(Peer reviewed; Journal article, 2019)This paper presents a method to simultaneously determine the thickness and permittivity of thin layers from multi-frequency reflection coefficient measurements using an open-ended coaxial probe. This is achieved by exploiting ... -
Combined Use of Aerial Photogrammetry and Terrestrial Laser Scanning for Detecting Geomorphological Changes in Hornsund, Svalbard
(Peer reviewed; Journal article, 2022)The Arctic is a region undergoing continuous and significant changes in land relief due to different glaciological, geomorphological and hydrogeological processes. To study those phenomena, digital elevation models (DEMs) ... -
Combining direct and indirect sparse data for learning generalizable turbulence models
(Peer reviewed; Journal article, 2023)Learning turbulence models from observation data is of significant interest in discovering a unified model for a broad range of practical flow applications. Either the direct observation of Reynolds stress or the indirect ... -
Comprehensive Direct Georeferencing of Aerial Images for Unmanned Aerial Systems Applications
(Peer reviewed; Journal article, 2022)Optical image sensors are the most common remote sensing data acquisition devices present in Unmanned Aerial Systems (UAS). In this context, assigning a location in a geographic frame of reference to the acquired image is ... -
Computer Vision Based Path Following for Autonomous Unammed Aerial Systems in Unburied Pipeline Onshore Inspection
(Peer reviewed; Journal article, 2022)Unmanned Aerial Systems (UAS) are becoming more attractive in diverse applications due to their efficiency in performing tasks with a reduced time execution, covering a larger area, and lowering human risks at harmful ... -
Condition monitoring of hydraulic cylinder seals using acoustic emissions
(Peer reviewed; Journal article, 2020)In recent years, there has been a growing concern for fluid spill from hydraulic cylinders in the offshore oil and gas industry. To diagnose the leakage from hydraulic cylinders, there have been attempts made in literature ... -
Connecting Multilayer Semantic Networks to Data Lakes: The Representation of Data Uncertainty and Quality
(Peer reviewed; Journal article, 2022)Drilling oil and gas wells is a complex process involving many disciplines and stakeholders. This process occurs in a context where some pieces of information are unknown, or are often incomplete, erroneous, or at least ...